Perma-Paint is an acrylic base paint, for interiors / exteriors.
Perma-Paint is washable with excellent finish, high coverage and easy application.
Perma-Paint is a Premium high quality finish paint resistant to wear, erosion, water / rain and is vapor permeable.
Suitable for interior and external walls and outdoor spaces and is also adequate for interior ceiling surfaces.
Stir well. Surfaces to be painted must be clean, dry and consistent. Where necessary, wash the surface to remove dirt, grease and powdery or dusty residues.
Rinse with clean water and allow to dry.
To secure the support and homogenize porosity, it is strongly recommended to apply a base coat of Perma-Filler.
Apply, using a roller or brush. The first coat can be diluted with 10-15% water. The second coat can be applied without diluting.
Clean brushes and rollers with soapy water after use.
Perma-Lastic Primer is a ready to use base coating primer applied on walls prior to the application of Perma-Paint, with elastic and waterproof characteristics, without tars or bituminous products.
Perma-Lastic Primer acts as a damp proof barrier between the wall and the paint. It has good bonding properties and seals the fine cracks prior to painting with Perma-Paint. It is an easy-to-apply primer and forms a protective sheet without joints and an impermeable elastic barrier.
The surface must be consistent, dry and free of dust. Always use a paint roller or a paint brush. It is enough to apply one coat.
Once the bucket is opened, the time to use the product is approx. 1 month. Always keep unused quantity in a tightly sealed container.
Perma-Filler is an essential putty product for creating smooth surfaces for painting and decorating walls and ceilings.
The surface must be absorbent, dry and free of dust. On smooth / non-absorbent cement surfaces, a suitable primer (PermaFlex) must be applied.
The paste comes ready for use. If necessary, water can be added up to a maximum of 1 liter per bucket. The paste can be used immediately, without letting it stand.
The tools must be clean.
When applying Perma-Filler use the spatula over it, removing the excess material. Apply maximum 1 mm material to avoid roughness up to 3 coats of the product, if necessary.
Before applying a second coat, the front must be completely dry. It is important to let the paste dry well between each hand, to avoid cracks due to material retraction.
Once dry, use sandpaper to smooth the surface smoothly. The maximum thickness of the paste must be 3 mm.
Once the bucket is opened, the time to use the product is approx. 1 month, if it has been sealed tightly.
Perma-Lastic is a waterproof paint that prevents water penetration in floors and walls. Ideal for roofs, terraces, cement tanks and external walls.
Perma-Lastic is also suitable for the repair of fissures and cracks in mortar and concrete and acts as a sealant. It can also be applied on roofing sheets Galvanized, Aluminium etc.
The surface must be consistent, dry and free of dust.
Always use a paint roller or a paint brush.
First coat: up to 20 % of water can be added mixed well and applied.
Second coat: wait at least 8 hours and apply without the addition of water.
Once the bucket is opened, use the product within one month.
Always keep unused quantity in a tightly sealed container.